Customization: | Available |
---|---|
After-sales Service: | Spart Parts After Sale Serviceengineers Available |
Usage: | Sheet |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Features of each parts of Metal sheet coil feeding line
Automatic loading coil car
Automatically lift the coil to the mandrel of the Decoiler Machine with loading coil car. And then the mandrel can expand and clamp the coil.
a) Loading capacity 5T-20T
b) Up-and-down movement the coil car by hydraulic cylinder
c) Horizontal movement by hydraulic motor
d) 2 Coil well-knit, no disperse
Decoiler:
a) Coil loading type: Single head with cantilever
b) Max. loading capacity: 10ton
c) Expansion type: Hydraulic
d) Brake type: pneumatic, stable and safe, also can prolong lifetime of the power system
e) Mandrel hydraulic expansion system. The hydraulic station provide power to drive the hydraulic cylinder to expand & draw back the mandrel to clamp coil or release the coil.
f) Press arm device to hold the strips, preventing coil loose. Further more, the press arm equipped with a PU roller to hold the strips, don`t scratching strip surface.
g) Support arm device. Driven by hydraulic-cylinder, it was use to guide and support strips, Further more, several sets of rollers installed in the device, and all rollers were chrome plated, the surface is very smooth, preventing scratching material surface.
h) Limit arm device, clamping coil in width direction, preventing coil collapsing when coil were too narrow. Further more, the width between two back gauge arms were designed adjustable by operate the manual wheels, coil width range is 70mm-1800mm.
i) Machine equipped with hydraulic station, providing oil pressure to drive the mandrel expansion & contraction and hydraulic cylinder.
j) Sensor device: electric eye loop control system, stable, safe and long lifetime. With the electric eye loop control system, the decoiler release strips automatically.(you can refer to the following image)
Model
|
MT-400F
|
MT-500F
|
MT-600F
|
MT-700F
|
MT-800F
|
MT-1000F
|
MT-1200F
|
Coil Width
|
200 mm
|
300 mm
|
400 mm
|
500 mm
|
600 mm
|
700 mm
|
800 mm
|
Coil Thickness
|
0.1 mm - 3.2mm
|
||||||
Coil I.D.
|
450-530 mm
|
||||||
Coil O.D.
|
1200 mm
|
||||||
Coil Weight
|
1000 kgs
|
1500 kgs
|
2000 kgs
|
3000 kgs
|
5000kgs
|
||
Expansion
|
Hydraulic Expanion
|
||||||
Pressing Arm
|
Pneumatic Type Pressing Arm
|
||||||
Inverter
|
Delta, Taiwan
|
||||||
Speed
|
16 m/min
|
Metal sheet stamping line is widely used to LED parts, automobile stamping, appliances manufacturing, computer and electronic componets, hardware and metal parts etc industry.
The configuration of NC Servo metal Punch Press Feeder Stamping line
Step-1: Decoiler machine, Loading coil and uncoilling coil.
Step-2: Straigtener machine, leveling the uncoiling strips.
Step-3: NC Servo Roll Feeder machine, Feed coil strips to press machine.
Step-4: Power pres machine with the moulds,pressing to the end product